Frame type stranding machine (with centralized winding device) is mainly used to produce large-length bare aluminum wire, bare copper wire and steel core aluminum stranded sector conductor stranding and pressing, and round conductor stranding, drawing and pressing. Forming and pressing, and equipped with segmented non-metallic belt wrapping device.

Frame type stranding machine, also known as frame stranding machine, is mainly used for stranding bare copper wire, bare aluminum wire, steel core aluminum stranded wire and sector conductor stranding and pressing, round conductor stranding, drawing and pressing, etc.

The characteristics of this equipment are: the wire reels are divided into four equal parts around the twisting cage, the centralized winding is convenient, correct and reliable, the equipment has high rigidity and strength, good overall performance, small moment of inertia, and high operating speed. The equipment adopts 36-speed gearbox transmission, adopts dual active and dual traction devices, and the traction force can reach 12T.


Performance characteristics of frame twister:

1. The wire reels are divided into four equal parts around the twisting cage, and the reels are concentrated. The equipment has high rigidity and strength, good overall performance, small moment of inertia, and high operating speed.

2. The traction drive of the equipment adopts a 36-stage gear box with dual active and dual traction devices. The traction force can reach 15 tons. The traction device adopts natural line separation to prevent the core from being scratched during the process of line separation.

3. The tension is even when the spool is full to empty.

4. The equipment adopts the current disconnection stop device, which can be directly controlled to each spool. When any spool is disconnected, the host will automatically stop. To ensure that the wire is repaired after the wire is broken, it is especially suitable for the production of power cables and high-pressure cross-linked cables.

5. The equipment can ensure that the 630mm2 copper core with a compacting density of 90% or more is drawn and compacted to meet the needs of large cross-section cross-linked cable stranding.